搪瓷管厂家告诉您工作温度对搪瓷管使用的影响
空气预热器、搪瓷管、内涂搪瓷螺槽管空气预热器、内外全涂搪瓷式空气预热器传热元件、搪瓷防磨套管等锅炉配件的研究二十年余年,目前产品遍布全国各地及印度、泰国、越南、印尼等周边国家。是专门为电力、石化、纺织、印染等行业开发、设计、制造效传热元件及配套设备的专业化生产厂家, 搪瓷管制成后,其搪玻璃即存在预压缩应力,而钢板则存在预拉伸应力。由于预应力与线膨胀系数和延伸率相关,线膨胀系数和延伸率与温度又密切相关,因此搪瓷管的工作温度对搪瓷管的使用影响很大。如果因温度变化大而使搪瓷产生的应力**过其使用应力,搪瓷将被破坏。因此搪瓷管搪瓷层遇冷、热急变,较易爆瓷。因此搪瓷管有耐温限制:温度 200℃,耐温急变:冷冲击<1IO~C,热冲击<120℃。
中温回火(250-500度)中温回火所得组织为回火屈氏体。其目的是获得高的屈服强度,弹性极限和较高的韧性。
Medium temperature tempering (250-500 degrees), medium temperature tempering income group as tempered troostite. Its is to obtain high yield strength,四川锅炉配件联系电话, elastic limit and high toughness.
因此,它主要用于各种GB/T9711.1搪瓷管和热作模具的处理,回火后硬度一般为HRC35-50。
Therefore,四川锅炉配件价格, it is mainly used for various kinds of GB/T9711.1 enamel tube and hot mould processing, after tempering hardness is HRC35-50 commonly.
低温回火(150-250度)低温回火所得组织为回火马氏体。其目的是在保持淬火钢的高硬度和高耐磨性的前提下,降低其淬火内应力和脆性,四川锅炉配件供应商,以免使用时崩裂或过早损坏。
Low temperature tempering (150-250 degrees), low temperature tempering the organization for the tempered martensite. Its aim is to keep a hardened steel under the premise of high hardness and high wear resistance, decrease the quenching stress and brittleness, lest when using split or premature failure.
它主要用于各种高碳的切削刃具,量具,GB/T9711.1搪瓷管,四川锅炉配件,滚动轴承以及渗碳件等,回火后硬度一般为HRC58-64。
It is mainly used for cutting all kinds of high carbon cutting, measuring tool, GB/T9711.1 enamel tube, such as pieces of rolling bearing and carburizing, after tempering hardness is commonly HRC58-64.